Prevention and reduction at source
Review materials, procurement, design and operations to avoid generation and reduce loss before paying to collect and manage it.
From cost and exposure to a manageable resource
Manage waste from source through recovery or safe disposal
We help projects and facilities prevent and reduce waste, classify, segregate and store it safely, select licensed service providers, trace movement and final destination, and turn data into decisions that reduce risk and cost while improving resource efficiency.
Prevent • Segregate • Trace • RecoverLicensed service providers for deliverySaudi Arabia • Egypt • Bilingual reporting
An integrated approach
Four connected controls prevent material loss and close chain-of-custody risks
We connect technical, contractual and data decisions across the complete waste journey rather than treating each container or contractor as a separate issue.
Safe segregation and storage
Clear classification, suitable containers and areas, compatibility, labels and controls that prevent mixing, releases, fire and exposure.
Reuse, recycling and recovery
Identify valuable streams and feasible recovery routes while considering quality, markets, practicality and impact.
Treatment and final-destination traceability
Connect quantities with transport, receipt, treatment, recycling and disposal records and check service-provider licence scope and validity.
Problems we solve
When no one can show where waste arose or where it ended
We turn fragmented streams into a classified register, responsibilities, controls and traceability records, then prioritise prevention and recovery by risk and value.
No reliable baseline
Quantities are estimated or split across sites and contractors without consistent weighing, definitions or comparison periods.
Mixing and misclassification
Recyclable, hazardous or incompatible wastes are combined, increasing exposure and cost while losing material value.
Weak temporary storage
Areas are unsuitable or overloaded and containers, labels, containment and emergency controls do not match the waste.
Unverified contractor or route
Licence scope and validity, vehicle, receiving facility and final destination have not been reviewed adequately.
Avoidable disposal cost
Materials that could be prevented, reused or recycled are sent for disposal without analysing alternatives or stream cost.
Reports without traceability
Contractor invoices, weigh tickets, transport records and receipt, treatment or recycling certificates do not reconcile with the site register.
Scope of work
From stream inventory to an operable plan, contractors and verifiable data
The scope reflects activity, project stage, hazardous and non-hazardous streams, number of sites, competent-authority requirements and contract obligations.
Inventory, classification and baseline
Understand where, how and how much waste arises and define characteristics and ownership.
- Source, stream and quantity inventory
- Hazardous, non-hazardous, inert or special classification
- Safety-data or testing review where needed
Prevention, reduction and resource efficiency
Identify higher waste-hierarchy options before collection and disposal.
- Design, materials, procurement and process review
- On-site and off-site reuse opportunities
- Recycling and recovery route and feasibility review
Segregation, storage and operations
Convert classification into clear daily controls for teams and contractors.
- Segregation, container and label matrix
- Storage layout, compatibility and containment
- Handling, emergency and inspection procedures
Contractors, transport and final destination
Select suitable service routes and providers and document waste movement.
- Tender requirements and technical evaluation
- Activity and licence-validity review
- Transport, weight, receipt, treatment and disposal evidence
Performance, compliance and improvement
Turn records into indicators, reviews and closeable actions.
- Mass balance and cost by stream
- Diversion and resource-efficiency indicators
- Audits, dashboard and improvement plan
Deliverables
Outputs that operate the system and show where every quantity went
Templates and technical depth reflect risk and site scale; no final route is selected before classification, licensing and available infrastructure are checked.
✓Project or facility waste-management plan
✓Waste-source, type and quantity register
✓Classification, characteristic and risk matrix
✓Regulatory and contractual requirement-and-responsibility register
✓Prevention, reduction and reuse roadmap
✓Segregation, container and label matrix
✓Storage layout, compatibility and containment requirements
✓Handling, emergency and inspection procedures
✓Service-provider tender scope and evaluation criteria
✓Licence, transport, weight, receipt and final-destination register
✓Quantity, cost, recovery and diversion performance dashboard
✓Training pack, audit plan and improvement roadmap
Delivery process
Seven stages from understanding streams to documented improvement
Confirm objective and scope
Define sites, activities, stage, streams, responsibilities and the required decision.
Inspect and collect data
Review generation and storage areas, contracts, invoices, weights and available records.
Classify and establish the baseline
Fix waste types, risks, measurement boundaries, quantities and uncertainty sources.
Design prevention and routes
Prioritise reduction, reuse, recycling and recovery before safe disposal.
Develop controls and contracting
Prepare segregation, storage, procedures, contractor requirements, traceability and team responsibilities.
Implement and build capability
Brief responsible teams, pilot templates and controls, and correct practical site barriers.
Verify and improve
Reconcile records, analyse indicators, audit, close actions and update the plan.
Engagement models
Support for one site, a construction project or a facility portfolio
Site assessment and baseline
A focused review of streams, storage, contractors, records and improvement opportunities.
Construction and demolition waste plan
A plan connected with design, procurement, contractors, quantity tracking and diversion during delivery.
Industrial and hazardous waste management
Classification, controls, providers and traceability for higher-risk or specialist streams.
Multi-site programme
Standardise definitions, contracts, data and indicators while respecting each facility’s conditions.
Tender or contractor-performance review
Develop requirements or assess bids, licences, service, invoices and final-destination evidence.
Delivery network
Licensed success partners across the waste value chain
Collection, transport, storage, sorting, recycling, treatment and disposal are delivered through service providers whose licence scope matches the activity, waste and location.
Saudi Arabia
We review providers listed by the National Center for Waste Management and match the licensed sub-activity, waste type, validity, vehicles and receiving facility with project needs.
Search the licensed-company registerEgypt
We coordinate providers holding the approvals or licences required by the Waste Management Regulatory Authority and other competent authorities for the relevant waste and collection, transport, treatment or disposal activity.
Visit the WMRA portalImportant note: Providers are selected according to waste type, licensed activity and validity, location, capability, capacity and final destination, while seeking the best competitive pricing consistent with safety, compliance and traceability quality. References to MWAN or WMRA do not imply accreditation, affiliation or endorsement of Sustainability in Business. Recycling or landfill-diversion performance cannot be guaranteed before quantities, stream purity, markets and available infrastructure are verified; approvals and licences remain decisions of the competent authorities.
Sectors
Plans shaped around the stream, risk and local infrastructure
Construction, demolition and real estateIndustry and industrial zonesWater, wastewater and sludgeEnergy, utilities and pipelinesCities and urban developmentTransport and logisticsOffices, hospitality and facilitiesHealthcare and laboratories under specialist scope
Related experience
Experience connected with construction, industrial and water-sector waste streams
Experience is presented at a high level to protect client identity, quantities, costs, contracting routes and sensitive operational information.
MODON INDUSTRIAL AREAS • RIYADH & JEDDAH
Industrial-area environmental compliance support (MODON)
Environmental performance and compliance work across industrial-area settings associated with MODON.
View experience →
WASTEWATER • NEOM, SAUDI ARABIA
Sewage treatment plant environmental management
Environmental and compliance support for modern wastewater-treatment infrastructure.
View experience →
LINEAR INFRASTRUCTURE • SAUDI ARABIA
Pipeline construction environmental management
Environmental risk and compliance management across long linear construction corridors.
View experience →These examples reflect the founder’s experience in prior roles and projects; they are not presented as contracts delivered by Sustainability in Business unless explicitly stated. Images are representative and do not show actual client sites.
Related services
Connect waste with compliance, monitoring, management systems and reporting
Frequently asked questions
Important answers before a waste-management plan is designed
What waste types can the service cover?
The scope may cover construction and demolition, commercial and administrative, industrial hazardous and non-hazardous, sludge, packaging, e-waste and other special streams. Classification and requirements are confirmed for each stream and location before scope approval.
How is hazardous waste identified?
Source, composition, properties, safety data and current technical classification are reviewed, and sampling and testing by a qualified provider may be required. A trade name or visual appearance alone is not sufficient.
Do you collect or transport waste?
Our role is consulting, covering planning, classification, controls, contracting, traceability and review. Regulated activities such as collection, transport, storage, treatment and disposal are delivered by an appropriate licensed provider.
How is a service provider checked?
We match activity, waste and location with licence scope and validity, vehicles, receiving facility, capacity and final-destination evidence, using official registers and contract documents.
What evidence supports the waste route?
Depending on the system, this includes generation logs, transfer or transport documents, weigh tickets, handover records, invoices, receipt, recycling, treatment or disposal certificates, and current licence copies.
How is diversion from disposal calculated?
Total generation, period and site boundary are fixed first. Evidence-backed reuse, recycling or recovery quantities are then compared with the total, with exclusions, weight losses and evidence quality disclosed.
Can zero waste to landfill be guaranteed?
No. A pathway can be developed, but achievement and substantiation depend on prevention, segregation quality, providers, markets, infrastructure, target definition and evidence quality.
Can you prepare a construction and demolition waste plan?
Yes. The plan can connect quantities with design, procurement, temporary materials, contractors, collection areas, reuse, recycling and periodic reporting.
How does waste management connect with sustainability, GRI and carbon?
Quantity, route and cost data support resource-efficiency indicators and relevant disclosures such as GRI 306, and can inform emissions calculations when boundaries, methods and data are consistent.
How are duration and fees determined?
They depend on sites, streams, quantities, risk, data maturity, visits, contracts, providers and required outputs. A clear scope, programme and fee follow initial review.
Can you show how much of every waste stream arose and where it ended?
Share the activity, site, types, quantities, providers and objective, and we will suggest a practical review starting with the highest risks and best prevention and recovery opportunities.